TPMC901  6 Port Extended CAN Bus Controller



TPMC901 6 Port Extended CAN Bus Controller


TPMC901 Block Diagram


TA102-10 1.8m Cable with DB-25 Male and Female Connector


TA202-10 25 Pole Terminal Block


TA302-10 Connection Kit, 1.8m Cable and 25 Pole Terminal Block


6, 4, or 2 Channel CAN Bus Controller with High Speed Interface and Front Panel I/O
The TEWS TPMC901 is a PCI Mezzanine Card (PMC) compatible module. The TPMC901-10 provides six complete CAN bus interfaces using six Bosch CC770 Rev. F CAN controller. Additionally to the standard data and remote frame, all channels support the extended data and remote frame according to the CAN specification 2.0 part A and B (standard 11 bit identifier and extended 29 bit identifier). All channels have the capability to transmit, receive and perform message filtering on extended and standard messages.

Each channel supports CAN High-Speed according to ISO11898 as the physical interface. The bus line termination is selectable by a jumper separate for each bus line pair. The data transfer rates of up to 1 Mbps are supported for a bus line length of 40m. The TPMC901-11 supports only four CAN bus channels and the TPMC901-12 has two CAN bus channels.

A wide range of drivers is available: Linux, LynxOS, Integrity, QNX, VxWorks and Windows. All drivers - except the Windows drivers - are supplied as C source code.

Product Specification

PMC module, 32 bit/33MHz PCI interface, IEEE P1386.1 compliant, PCI 2.1 compliant

6, 4, or 2 extended CAN bus interfaces

6 Bosch CC770 Rev. F CAN controller

PIN and function compliant to Intel 82527 CAN controller

Compliant to CAN specification 2.0 part A and B

CAN High-Speed interface for each channel

Front panel I/O

Linux, LynxOS, Integrity, QNX, VxWorks, and Windows drivers are available

TPMC901-10 378.144 h 
TPMC901-11 446.368 h
TPMC901-12 544.628 h

0C .. 70C operating temperature range

5 years warranty



Ordering Information


6 channel extended CAN controller


4 channel extended CAN controller


2 channel extended CAN controller



1.8m cable with DB-25 connectors



25 pole terminal block with DB25 connector



Connection kit, 1.8m cable and 25 pole terminal block



Integrity driver


VxWorks driver


Windows WDM driver


LynxOS driver


LINUX driver


QNX 6 driver


TPMC901 6/4/2 Channel Extended CAN Bus PMC Module User Manual




powerBridge Computer Vertriebs GmbH

Ehlbeek 15a 30938 Burgwedel Germany
Tel: +49-5139-9980-0 Fax: +49-5139-9980-49

DIN EN ISO 9001:2008 zertifiziert

DIN EN ISO 14001:2009 zertifiziert

100% papierloses Unternehmen

Copyright 2015 by powerBridge Computer Questions or comments to: